Adls-01 0

Version: 0

Downloads:203

Hits:6936

SourceNO

Link Broken:Report It!

Package:Without source

Price:$0

More info Download

Description

You may select "Load applications" from the Autocad "tools" pull-down menu.
Pick the file button. Find directory ADLS-PARKING then select PARKDEMO14.ARX or PARKDEMO16.VLX. The file will then be placed in
the "Files to load" box. Choose save list, this will keep the file there for future use. Click
on the file to highlight it and choose LOAD. Design Parking is now loaded.


To begin Design Parking, type at the command prompt : PARKING
The Design Parking dialog box will appear.


NOTE:
Before beginning be sure to set LTSCALE to the scale of the drawing. You may do this
by typing LTSCALE at the command prompt and entering the scale of the drawing in
drawing units.

Wheel chair accessible stalls are referred to as ACCESSIBILITY stalls in this program
and may be abbreviated as AC.

-------------
ENTERING DATA
-------------

Stall angle:
Enter angle of parking, such as: 45, 60, 90 or any number between 0 and 90.

Stall width:
Enter width of parking stall.

Min. stall length:
Right angle stall depth:
You may enter the minimum stall length or the parking depth at right angles.

Each time you change one of the above items, Design Parking will recalculate the
remaining items with the new entry. This may be useful to you in laying out your parking
lot.

Include accessibility stalls:
Choose NO for no accessibility stalls. Choose ALL if all stalls will be accessibility stalls.
Choose YES if you want to add a certain number of accessibility stalls to the beginning
or end of the row of stalls.

Accessibility stall width:
Enter width of accessibility stall.

Number of AC stalls to add:
Enter the number of accessibility stalls to add to row of parking stalls.

Place AC stalls at:
Choose BEGINNING or END to place accessibility stalls at the beginning or end of row.

---------------------
PARKING STALL OPTIONS
---------------------

Select the options button.

Define parking along: (Edge of drive or Back of stalls)
To lay out a new parking lot you should block off stall areas and define parking along
edge of drive.
If you are trying to add stalls to an existing parking lot you should define parking along
back of stalls.

Place perpendicular line at end of stall:
Select YES to place a line at the end of the parking stall perpendicular to the stall.
Select NO to place the line parallel to drive.

Insert parking blocks:
Select YES to insert parking blocks at each stall. Select NO for no parking blocks.

Width of hatched portion of AC stalls:
You may define a portion of the accessibility stall to be hatched. The hatch lines will be
drawn at 45 degrees to the stall. Enter the width of the hatched portion of the stall.
-------------------------------------------------------------------------
If you do not want to hatch a portion of the stall, enter 0 for no hatch.
-------------------------------------------------------------------------

Space between hatch lines:
You may define the spacing of the hatch lines in the accessibility stall.

Place hatch on which side of stall:
Choose RIGHT to place hatch on right side of stall. Choose LEFT to place hatch on left
side of stall.

Place sign symbol at AC stalls:
Choose YES to place a sign symbol at accessibility stalls. Choose NO for no sign
symbol.

Choose DRAW RADIAL STALLS to draw radial stalls and save settings.

Choose DRAW STALLS to draw stalls and save settings.

Choose CANCEL to discard settings.

Choose TABULATE to tabulate the number of parking stalls in the drawing.

Settings are saved for each drawing in a file called "dwgname".lot.

---------------------
DRAWING RADIAL STALLS
---------------------
Design Parking will use the min. stall width and min. stall length to create radial stalls.
Select the center of curve, the start point for stalls and the end point (not to exceed).
Be sure to specify whether you are defining stalls from edge of drive or from back of stalls.

--------------
DRAWING STALLS
--------------
Before you begin drawing stalls, You will need to lay out the parking lot into stall bay
areas.

ALIGNING STALLS IN DOUBLE STALL BAYS

To align stalls in double stall bays, first create a row of stalls. Then extend a stall line to
the other side. This will be the beginning point of the next row.
Use these boundaries to create duplicate stall bays.

Select the draw button.
Stalls will be drawn in the direction that you are driving through the parking lot. Be sure
to choose "Define parking along : Edge of drive". Select the beginning point. Select the ending
point. Select a point to show Design Parking which side to place stalls.
When you are through drawing stalls, click the enter button. The Design Parking dialog
box will re-appear. You may change the settings and continue to draw stalls, or you may
choose cancel to quit.

-------
LAYERS
-------

The wheel chair symbol may be frozen by freezing layer WHEEL_CHAIR_SYM.

The parking blocks may be frozen by freezing layer PARKING_BLOCKS.

The accessibility sign symbol may be frozen by freezing layer AC_SIGN_SYMBOL.

The number of spaces may be frozen by freezing layer DPSTALL_TAB.

---------------
TABULATE STALLS
---------------

To tabulate stalls select the tabulate button. Design Parking will then add all of the blocks
containing number of stalls. At the command line Design Parking will print the number
of standard parking stalls, the number of accessibility stalls and the number of total
parking spaces.

NOTE:
The blocks containing the number of stalls are necessary for Design Parking to tabulate
the total number of stalls. You may freeze the layer they are on but do not erase them.
If you make manual changes to the parking lot, you must update the number of stalls
listed in the block. You may do this by typing DDATTE at the command prompt and
selecting the block you want to edit. Type in the correct number of spaces. Press OK.

If you add a row of stalls manually, just copy one of the blocks containing stall numbers
(or AC stall numbers) and place it on your new row. Edit it as shown above with the
correct number of spaces.

Note: If you do not see the parking stall tabulation blocks on your drawing, the
LTSCALE setting needs to be set to the scale of your drawing.

Tabulation blocks: 20 Spaces 2 Ac.Sp.

Related:

Adls-01

User Reviews:

Write Review *
Your name *
Email *
(Your comments will be reviewed by our staff before they are posted)
Rate this product *
Captcha Image
Enter code from image *

 

Related:

HTML & XHTML : The Definitive Guide

Plenty of books can teach you HTML quickly, getting you up to speed and hacking out Web pages in no time. HTML & XHTML: The Definitive Guide offers...

By: Chuck Musciano, Bill Kennedy Homepage

Shareware

Sams Teach Yourself Web Publishing with HTML and XHTML in 21 Days

A guide to becoming skilled and proficient in HTML 4.01 and XHTML 1.0 in 21 days or less. Covers the recent Web publishing technologies and...

By: Laura Lemay, Denise Tyler, Rafe Colburn, laur Lemay Homepage

Shareware

Browser Entry Alert

Browser Entry Alert implements an alert capability in your web page. In this the script can detect the name of the browser of the visitor and its...

By: JavaScript City Homepage

Freeware

PostNuke 0.63

A full-featured CMS/WebLog system featuring article submissions, comments, integrated banner systems, modular design, support for various message...

By: PostNuke.com Homepage

Freeware

A to Z Affiliate Script 3.I

This is TWSC Affiliate Lite v 3.01. No database required and fully automated with PayPal IPN system. Track referring affiliates through any online...

By: Willie Smith Homepage

Shareware

tListe VI.20

tListe is a nice and fast TreeView Applet. its very small size an easy use (between 12 and 20 Ko according to the version). tListe runs on all...

By: javaside.com Homepage

Freeware

AEA MMFireImage 1.0

AEA MMFireImage is a freeware applet to incorporate a fire effect on image changeover. Supports descriptions to images and URLs. Also supports...

By: AEA MMFireImage Homepage

Freeware

AEA MMMotionblurMessage 1.0

AEA MMMotionblurMessage displays a blurring effect on the incoming and outgoing messages, which seems to be appearing from a distance. The messages...

By: AEA MMMotionblurMessage Homepage

Freeware

Smart Search Professional IV.34

Smart Search is a unique search engine script like none other available for sale on the Internet. It's called a pay-per-click search engine;...

By: Jimmy Homepage

Shareware

Hotcount 01 ?

Hotcount 01 is multi-platform compatible. Powerfull access counter. Graphic counter. Text counter. Hidden counter. Count all your pages with one...

By: hotarea.net Homepage

Freeware
New Component
Popular Component
Popular Search